Samsung ES70 Inserting the memory card, Using the Anti-scratch Mask, Insert the battery as shown

Ofrecido por www.electromanuales.com

Connecting to a Power Source

ÊInsert the battery as shown

- If the camera does not turn on after you have inserted battery, please check whether the battery (+ / -) direction is right.

- When the battery chamber cover is opened, do not force the battery chamber cover, this may damage it.

Inserting the memory card

ÊInsert the memory card as shown.

- Turn off the camera’s power before inserting the memory card.

- Have the front label of the memory card facing toward the front of the camera (Lens) and the card pins toward the back of the camera (LCD monitor).

-Do not insert the memory card the wrong way round.

Doing so may damage the memory card slot.

ÊThere are 4 indicators for battery condition that are displayed on the LCD monitor.

Battery
indicator
		Low battery	Low battery	Battery empty
Battery		capacity	capacity
	The battery is			(Recharge
		(Prepare to	(Prepare to
status	fully charged			or use spare
		recharge or use	recharge or use
				battery)
		spare battery)	spare battery)

ÄWhen using the camera and the battery in a place that is excessively cold or hot, the battery status on the LCD may be different from the actual battery status.

Using the Anti-scratch Mask

ÊInsert the anti-scratch mask as shown.

- Using the anti-scratch mask can protect the camera from accidental scratches.

Make sure two points of holes in the camera body are connected to the anti-scratch mask.

015