Samsung FG87SUST/ELE manual General Technical information, Safety, Electrical connection, BKT-Base

DE68-03134T-00

general

technical information

Electrical supply:	230 V
	AC, 50 Hz
Power consumption:	2300 W (FG88S/FG87S)
	1150 W (FW88S/FW87S)
Dimensions(w×h×d):	489*275*360 (FG88S/FG87S)
	489*275*344 (FW88S/FW87S)

This appliance complies with the EU regulations.

disposal of packaging and appliance

The appliance's packaging is recyclable.

The following can be used:

-cardboard;

-polyethylene ￿lm (PE);

-CFC-free polystyrene(PS rigid foam).

Dispose of these materials in a responsible manner and in accordance with government regulations.

The authorities can provide you with information about how to dispose of discarded domestic appliances in a responsible manner.

safety

The appliance should only be connected by a quali￿ed technician.

The microwave oven has been designed for domestic use. You should use it exclusively for cooking food.

The appliance is hot during and after use.

Bear this in mind if young children come anywhere near the appliance.

Installation near to a conventional oven.

-Where a microwave oven is to be installed next to a conventional oven, suf￿cient space between them should be allowed to prevent overheating, as the surround can wrap with excessively high temperatures, Obviously, it is important to adherent strictly to the conventional oven manufacturer's installation instructions.

-A built-in microwave oven must not be installed above a conventional oven otherwise the microwave oven's cooling system may be adversely affected by hot air produced by the conventional oven.

electrical connection

The house mains to which the appliance is connected should comply with national and local regulations.

If you wish to make a ￿xed connection, ensure that a multipolar switch with a minimum contact spacing of 3 mm is ￿tted in the supply line.

FG88S / FG87S

FW88S / FW87S

Installation instructions microwave oven

50

	**564		in
in in
**362	50	550
in
850 min

200 cm2

Building-in dimensions

380

595

BKT-Install

Fig1

Fig2

1. Use the 3mm drill to make holes. Fix screws into BKT-Install. (Fig1) EN

2.Insert the microwave oven into the cabinet. (Fig2)

3.Use the template to place the BKT-Base 71mm away from "A" side of the cabinet. (Fig3)

4.Use the 3mm drill to make holes. Fix screws into BKT-Base. (Fig4)

5.Attach the surround. (Fig5)

6.Make the electrical connection. Check that the appliance work.

	"A" side
	CABINET
	FRONT
BKT-Base	71 mm
Fig3	Fig4
Fig5

Template

side “A”

mm 71

FRONT CABINET