![](/images/new-backgrounds/1227696/22769615x1.webp)
Installation and Connection
EN | ● This appliance is NOT intended for use in a commercial environment. |
|
●Please observe the installation instructions provided and note that this appliance should only be installed by a qualified technician.
●The appliance is fitted with a plug and must only be connected to a properly installed earthed socket. The fuse protection must be rated at 16 amps (L or
●In case a new socket is need, installation and cable connection must only be done by a qualified electrician. If the plug is no longer accessible following installation, a pole discon- necting device must be present on the installation site with a contact gap of at least 3 mm.
●Adapters, multiway strips and extension cords must not be used. Overloading can result in fire.
●Plug in
When the appliance has been connected for the first time, all segments are lit for a second. After 3 seconds, 12:00 flashes in the display prompting you to select the clock. Do not forget to reset the clock when you switch to and from summer or winter.
min 550
min 564 max 568
min 446 |
|
max 450 | 50 |
460
200 cm2
595
520
6