3-4 Using the Product
Eco Solution • <No Signal Power Off>
Saves power by turning the TV off when no signal is received from any source.
• <Off> - <15 min.> - <30 min.> - <60 min.>
Disabled when the PC is on DPM(Display Power Management).
Auto Adjustment The values of <Fine>, <Coarse> and <Position> are adjusted automatically.
By changing the resolution in the control panel, auto function is performed.
Available only <PC> mode.
Press the [TOOLS] button to display the Tools menu. You can also set the <Auto Adjustment> by
selecting <Tools> → <Auto Adjustment>.
Screen • <Coarse>
Removes noise such as vertical stripes.
<Coarse> adjustment may move the screen image area. You may relocate it to the center using
the horizontal control menu.
•<Fine>
Removes noise such as horizontal stripes.
If the noise persists even after <Fine> tuning, repeat it after adjusting the frequency <Coarse>.
• <Position>
Adjusts the screen location horizontally and vertically.
• <Image Reset>
Image parameters are replaced with the factory default values.
Available only <PC> mode.
Picture Options • <Color Tone>
The tone of the color can be changed.
• <Cool> - <Normal> - <Warm> - <Custom>
• Available only <PC> mode.
• Not available when <MagicBright> is <Dynamic Contrast>.
• <R-Gain > - < G-Gain > - <B-Gain >
Adjusts the individual R, G, B (Red, Green, Blue) color controls.
Not available when <MagicBright> is <Dynamic Contrast>.
• <Size>
You can switch the Size.
• <16:9> - <4:3>
• <Auto Protection Time>
Set the time the screen remains idle with a still image until the screen saver is activated. The
screen saver prevents the formation of ghost images on the screen.
• <2 hours> - <4 hours> - <8 hours> - <10 hours> - <Off>
Picture Reset Picture parameters are replaced with the factory default values.
•<OK> - <Cancel>
MENU DESCRIPTION