User’s Manual

Setup

Connecting Your Monitor(SyncMaster 151S/151B)

1.Connect the power cord for your monitor to the power port on the back of the monitor. Plug the power cord for the monitor into a nearby outlet.

2.Connect the signal cable to the 15-pin, D-sub connector on the back of your monitor.

3.If you are using a Macintosh computer, connect the cable to a Macintosh adapter, and set the pins on your adapter(Adapter not included). A PC-compatible computer does not need an adapter.

Note : Turn on your computer and monitor. If your monitor displays an image, installation is complete.