Samsung GH68-12949A WEP210, Before using your headset, Check the accessories, Charge your headset

Quick Start Guide

Samsung

Bluetooth® Headset

WEP210

Get connected in 4 quick steps

Charge your headset

Put your headset in pairing mode

Turn on Bluetooth on your phone and pair with headset

Test and use

Start here

Before using your headset

Thank you for purchasing the Samsung Bluetooth Mono Headset WEP210. We hope you will be delighted with its operation.

Take a moment before you get started to familiarize yourself with your new headset.

Multi-Function	Volume Up
	button
button
	Earpiece
Indicator light
	Volume Down
	button
Adapter jack Microphone

Check the accessories

Make sure you have the following items with your headset:

Travel Adapter, User’s Guide

The items supplied with your headset may vary, depending on your country or service provider.

•Bluetooth version: 2.0 (compatible with devices of Bluetooth version 1.1 or higher)

•Supported Bluetooth Profiles:

-Headset Profile

-Hands-Free Profile

Charge your headset

Charge the headset's battery fully before using the headset for the first time.

1Plug the travel adapter into the jack on the headset.

2Plug the travel adapter into the electrical outlet.

•Charge the headset until the red light on the headset turns to blue.

•The headset will be fully charged in approximately 2 hours and 30 minutes.

3Remove the travel adapter from the headset.

•The headset cannot be used while charging.

•Use only a Samsung-approved charger or adapter.

Headquarters:

1301 East Lookout Drive Suite 150

Richardson, TX 75082

Internet Address:

http://www.samsungmobileusa.com/ accessories

Customer Care Center:

1-888-987-4357

Guide No.: GH68-12949A

11/2006. Rev. 1.0

Put your headset in pairing mode

Before you can use your headset, you must pair it with your phone.

1Ensure that the headset is off (see Turn

headset on/off on the reverse side of this guide).

2Press and hold the Multi-Function button until the blue indicator light stays on after blinking.

Turn on Bluetooth on your phone and pair with headset

1Set your Bluetooth phone to discover the headset by following your phone's guide.

Typically, the steps involve going to the Settings, Connection, or Bluetooth menu on your phone and then selecting the option to discover Bluetooth devices.

Your phone will find the Samsung WEP210 headset and ask if you want to pair with it. Confirm this by pressing the Yes or OK key.

2Enter a passkey or PIN, 0000 (4 zeros), then press the Yes or OK key.

Test and use

Your phone and headset are now paired and ready to make and receive calls. To confirm they are operating properly, make a call:

1Place the headset over your ear.

See Wear the headset on the reverse side of this guide.

2On your phone, make a call to the number you want.

3If your phone and headset are successfully paired, you will hear ringing on the headset.

After you have successfully paired your phone and headset, you do not need to repeat these initial setup steps each time you use the headset.

Using your WEP210

See Features and Functions Guide on the reverse side of this guide

for information on using your WEP210.