Communication 37
To dial a second call, place the rst call on hold and then •
dial a new number.
To answer a second call, select • New call when a call
waiting tone sounds. The rst call is automatically placed
on hold. You must subscribe to the call waiting service to
use this feature.
To switch between the two calls, select • Swap.
To end the call on hold, select • Swap
→
End call.
To make a multiparty call (conference call), make or •
answer a second call and select Join when connected
to the second party. Repeat to add more parties. You
must subscribe to the multiparty call service to use this
feature.
To connect the current party to the party placed on hold, •
select
→
Transfer. You will be disconnected.
To activate the speakerphone feature, select • Speaker.
You can activate the speakerphone feature with motion.
In Menu mode, select Settings
→
General
→
Gestures
→
Putting down (Speaker call). Then, during a call,
place your device on a table or a at surface.
In noisy environments, you may have diculty
hearing some calls while using the speakerphone
feature. For better audio performance, use the
normal device mode.
To turn o the microphone so that the other party •
cannot hear you, select Mute.
To listen and talk to the other party via the headset, •
select Headset.
To switch the current call to a video call, select•
→
Switch to video call.
To remove noise from your background so that the other •
party can hear you more clearly, select
→
Noise
reduction on.
To record a voice call, select•
→
Record voice.