Adjusting Your LCD Monitor

Automatic Save

Whenever you open the OSD and allow an adjustment window to remain active for about 3 seconds without pressing another button, the monitor automatically saves any adjustments you have made. These changes are saved into a user area in the monitor. User areas are reserved according to the signal frequency from your computer. The monitor can save adjustments for up to 5 user modes. It has 11 factory preset or preload modes, one for each signal frequency as listed in “Display Modes” on page 21

If you have made no adjustments, the OSD disappears and the monitor does not save anything. To exit without saving the changes you have made, press the EXIT button before the 2 seconds elapse.

Direct-Access Features

The features described in this section can be accessed quickly, at the touch of one button. Once you finish making adjustments to a feature, push the EXIT button to turn off the menu or allow the OSD to time-out and disappear automatically.

Brightness

Brightness

99

Follow these instructions to adjust the brightness of the monitor’s display.

1

With the menu off, push the or “+

button. The brightness display appears.

2

Push the “+” button to increase the

brightness; push the button to decrease

the brightness.

English 10

Page 12
Image 12
Samsung GT18MSSB/EDC, GR18MSSSN/EDC manual Automatic Save, Direct-Access Features, Brightness, Push the + button to increase