Step 4: Inserting a “Memory Stick PRO Duo”

POWER switch

Access lamp

If you insert a new “Memory Stick PRO Duo,” the [Create a new Image Database File.] screen appears.

See page 2 on the “Memory Stick” you can use with your camcorder.

1 Open the LCD panel.

2 Slide the POWER switch repeatedly until the (Movie) lamp lights up.

3 Insert the “Memory Stick PRO Duo.”

1Open the Memory Stick Duo cover in the direction of the arrow.

2Insert the “Memory Stick PRO Duo” into the Memory Stick Duo slot in the right direction until it clicks.

3Close the Memory Stick Duo cover.

4 On the [Create a new Image Database File.] screen, touch [YES].

To eject a “Memory Stick PRO Duo”

Open the LCD panel and Memory Stick Duo cover, lightly push the “Memory Stick PRO Duo” in once.

bNotes

•When the access lamp is lit or flashing, your camcorder is reading/writing data. To prevent image data from being damaged, do not:

–eject the “Memory Stick PRO Duo”

–remove the battery pack or AC Adaptor

–shake or knock your camcorder

•Do not open the Memory Stick Duo cover during recording.

•If you force the “Memory Stick PRO Duo” into the slot in the wrong direction, the “Memory Stick PRO Duo,” the Memory Stick Duo slot, or image data may be damaged.

•If [Failed to create a new Image Database File. It may be possible that there is not enough free space.] is displayed on step 4, format the “Memory Stick PRO Duo” (p. 23). Note that formatting will delete all data recorded on the “Memory Stick PRO Duo.”

10