Samsung HL-P6163W Memorizing the Channels, Adding and Erasing Channels, Alternate method

-02(24~45) 5/6/04 11:33 AM Page 28

O p e r a t i o n

Memorizing the Channels

Your TV can memorize and store all of the available channels for both “off-air” (antenna) and cable channels. After the available channels are memorized, use the CH and CH buttons to

Storing Channels in Memory (Automatic Method)

First, select the correct signal source (“Air”, “STD”, “HRC” or “IRC”) as described on the previous page.

scan through the channels. This eliminates the need to change channels by entering the channel digits. There are three steps for memorizing channels: selecting a broadcast source, memorizing the channels (automatic) and adding/deleting channels (manual).

Selecting the Video Signal Source

Before your TV can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV (i.e., an antenna or a cable system).

	Press the MENU button.		Channel
1 Press the … or † button to		Input	Antenna	: Ant.1	√
			Air/CATV	: Air	√
	select “Channel”, then press	Picture	Auto Program		√
	the ENTER button.		Add/Delete		√
		Sound	Favorite Channels		√
			Name		√
		Channel	Fine Tune		√
		Setup	▼ More
			Move	Enter	Return

1 Press the MENU button.

Press the … or † button to select “Channel”, then press the ENTER button.

2 Press the … or † button to select “Auto Program”, then press the ENTER button. Press the ENTER button to start the auto program.

The TV begins memorizing all of the available stations.

Press the ENTER button at any time to interrupt the memorization process.

Press the EXIT button to exit.

Channel

Input	Antenna	: Ant.1	√
	Air/CATV	: Air	√
Picture	Auto Program		√
	Add/Delete		√
Sound	Favorite Channels		√
	Name		√
Channel	Fine Tune		√
Setup	▼ More
	Move	Enter	Return

Auto Program

Start

Enter Return

Adding and Erasing Channels

2 Press the … or † button to select “Air/CATV”, then press the ENTER button.

Channel

Input	Antenna	: Ant.1
		Aire

Air/CATV : AirSTD

Picture	Auto Program	HRC
	Add/Delete	IRC

You can add channels that were not memorized or delete unwanted channels from memory.

If you are connected to an antenna, press the … or † button to select “Air”.

If you connected cable, press the … or † button to select the type of cable system: “STD”, “HRC” or “IRC”.

Press the EXIT button to exit.

Sound	Favorite Channels
	Name
Channel	Fine Tune
Setup	▼ More

Move Enter Return

1 Press the MENU button.

Press the … or † button to select “Channel”, then press the ENTER button.

2 Press the … or † button to select “Add/Delete”, then press the ENTER button.

Repeatedly pressing the ENTER button will alternate between add channel and delete channel.

Channel

Input	Antenna	: Ant.1	√
	Air/CATV	: Air	√
Picture	Auto Program		√
	Add/Delete		√
Sound	Favorite Channels		√
	Name		√
Channel	Fine Tune		√
Setup	▼ More
	Move	Enter	Return

Add/Delete

Air 12 Not In Memory

NOTES

• “STD”, “HRC” and “IRC” identify various types of cable TV

systems. Contact your local cable company to identify the type

of cable system that exists in your particular area. At this point

the signal source has been selected. Proceed to “Storing

Press the CH or CH button (or number buttons) to switch to the appropriate channel, then repeat above.

Press the EXIT button to exit.

Add

Change Enter Return

Channels in Memory”.

• Subscription cable services require service-specific requirement

for viewing.

28

Alternate method

Simply press the ADD/DEL button on the remote control to add or delete channels.

29

Downloaded from www.Manualslib.com manuals search engine