Samsung HL-R4662W manual Adding and Erasing Channels, Storing Channels in Memory Automatic Method

Storing Channels in Memory (Automatic Method)

First, select the correct signal source (“Air”, “STD”, “HRC” or “IRC”) as described on the previous page.

1 Press the MENU button.

Press the … or † button to select “Channel”, then press the ENTER button.

2 Press the … or † button to select “Auto Program”, then press the ENTER button. Press the ENTER button to start the auto program.

The TV begins memorizing all of the available stations.

Press the ENTER button at any time to interrupt the memorization process.

Press the EXIT button to exit.

Channel

Input	Antenna	: Ant.1	√
	Air/CATV	: Air	√
Picture	Auto Program		√
	Add/Delete		√
Sound	Favorite Channels		√
	Name		√
Channel	Fine Tune		√
Setup	▼ More
	Move	Enter	Return

Auto Program

Start

Enter Return

Adding and Erasing Channels

You can add channels that were not memorized or delete unwanted channels from memory.

1 Press the MENU button.

Press the … or † button to select “Channel”, then press the ENTER button.

2 Press the … or † button to select “Add/Delete”, then press the ENTER button.

Repeatedly pressing the ENTER button will alternate between add channel and delete channel.

Press the CH or CH button (or number buttons) to switch to the appropriate channel, then repeat above.

Press the EXIT button to exit.

Channel

Input	Antenna	: Ant.1	√
	Air/CATV	: Air	√
Picture	Auto Program		√
	Add/Delete		√
Sound	Favorite Channels		√
	Name		√
Channel	Fine Tune		√
Setup	▼ More
	Move	Enter	Return

Add/Delete

Air 12 Not In Memory

Add

Change Enter Return

Alternate method

Simply press the ADD/DEL button on the remote control to add or delete channels.

English - 29