51
Special Features
50

Setting Up the Remote to Operate Your DVD

1Turn off your DVD.
2Press the MODE button and make sure
that the DVD LED is illuminated.
3Press the SET button on your TV’s remote
control.
4Using the number buttons on your
remote control, enter three digits of the
DVD code listed on page 51 of this
manual for your brand of DVD. Make
sure you enter three digits of the code,
even if the first digit is a “0.” If there is
more than one code listed, try the first
one.
5Press the Power button on the remote
control. Your DVD should turn on if your
remote is set up correctly.
If your DVD does not turn on after set
up, repeat steps 2, 3, and 4, but try
one of the other codes listed for your
brand of DVD. If no other codes are list-
ed, try each code, 000 through 008.

Note on Using Remote Control Modes: DVD

When your remote control is in “DVD”mode, the volume buttons still control your TV’s volume.

Remote Control Codes

VCR Codes

Cable Box Codes

DVD Codes

BP68-00142A-4 5/27/03 10:08 AM Page 50