65
Special Features
64

Selecting an External Signal

You can use PIP to view a signal from an external source, such as a VCR.
1Press the Menu button. Move
the joystick down to select
PIP, then press the joystick to
enter. Quick way to access PIP
source: Just press “Source” on
the remote control.
2Move the joystick down to
select “Source”.
3Move the joystick right or left
to select an external signal.
You can choose between
“TV”, “Video 1~3”, or
“S-Video 1~3”.
The signal from these inputs will not appear if you have
not connected any equipment to the TV’s input jacks.
For more information about external signals, see
“Viewing an External Signal Source” (See page 41).
If you select “TV.” the PIP image is the same as the
main image.
4Press Menu to exit.
NOTE
• The PIP subscreendoesn’t support ANT-B, Component1, Component2, Component3, PC, and
DVI.

Viewing Picture-in-Picture

One of the most best features of your TV is the Picture-in-Picture (PIP) feature. The advanced PIP
system allows you to watch two different pictures at once, even if you don’t have a VCR connect-
ed to your TV.

Selecting a PIP Screen

1Press the Menu button. Move
the joystick down to select PIP,
then press the joystick to
enter.
Quick way to access PIP:
Just press “PIP” on the remote
control.
2Move the joystick right to
select PIP “On”. The PIP
image will appear in the
corner of the screen.
3Press Menu to exit.

NOTES

• Picture-in-Picture doesn’t function when the V-chip is active.
• If you turn the TV off while watching and turn it on again, then the mode will return to normal
video.
• Screen size can’t be changed in the PIP mode.

BP68-00142A-4 5/27/03 10:08 AM Page 64