Ventilation | Samsung HMX-E10WN/XAA instruction

important safety instructions

15. Apparatus shall not be exposed to dripping or splashing and no objects ﬁlled with liquids, such as vases, shall be placed on the apparatus.

16.VENTILATION:

Slots and openings in the cabinet are provided for ventilation to ensure reliable operation

of the CAMCORDER and to protect it from overheating. These openings must not be blocked or covered. Never place your CAMCORDER on a bed, sofa, rug, or other similar surface: on or near a radiator or heat register. This CAMCORDER should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to.

17.POWER SOURCES:

The CAMCORDER should be operated only from the type of power source indicated on the label. If you are not sure of the type of power supply at your home, consult your appliance dealer

or local power company. A CAMCORDER is intended to be operated from battery power, or other sources, refer to the operating instructions.

18.GROUNDING OR POLARIZATION:

This CAMCORDER may be equipped with either a polarized 2-wire AC line plug (a plug having one blade wider than the other) or a

3-wire grounding type plug, a plug having a third (grounding) pin. If you are unable to insert the plug fully into the outlet, try reversing the plug.

If the plug still fails to ﬁt, contact your electrician to replace your outlet. Do not defeat the safety purpose of the polarized plug.

19.POWER-CORD PROTECTION: Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords or plugs, convenient receptacles, and the point where they exit from the unit.

20.OUTDOOR ANTENNA GROUNDING: CAMCORDER, be sure the antenna or cable system is grounded to provide some protection against voltage surges and built-up static charges, Section 810 of the National Electrical Code, ANSI/NFPA No. 70-1984, provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire and supporting structure, grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding to conductors, location of antenna-discharge unit, connection to grounding electrodes and requirements for the grounding electrode. See ﬁgure below.

	ANTENNA
	LEAD IN
	WIRE
	GROUND
	CLAMP
	ANTENNA
	DISCHARGE UNIT
	(NEC SECTION 810-20)
ELECTRIC
SERVICE	GROUNDING CONDUCTORS
EQUIPMENT	GROUNDING CONDUCTORS
	(NEC SECTION 810-21)
	GROUND CLAMPS
	POWER SERVICE GROUNDING
	ELECTRODE SYSTEM
	(NEC ART 250, PART H)

NEC NATIONAL ELECTRICAL CODE

21.LIGHTNING:

For added protection of this CAMCORDER during a lightning storm or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the CAMCORDER due to lightning and powerline surges.

22.POWER LINES:

An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.

HMX-E10WN/XAA specifications

The Samsung HMX-E10WN/XAA is a compact and versatile camcorder designed for users seeking to capture high-quality video with ease. With its sleek design and lightweight body, it is tailored for both casual and more serious videographers. This camcorder offers impressive features that make it a noteworthy choice in the consumer video market.

One of the standout features of the HMX-E10WN/XAA is its full HD 1080p video recording capability. This allows users to capture crisp, vibrant footage with rich detail, making it ideal for documenting special events or creating content for online sharing. The 10x optical zoom offers versatility in capturing subjects from a distance while maintaining clarity, providing flexibility in various shooting scenarios.

Additionally, the HMX-E10WN/XAA is equipped with a 1/3.2-inch CMOS sensor, which enhances low-light performance, enabling users to shoot in challenging lighting conditions without sacrificing quality. The built-in image stabilization technology further ensures that videos remain steady, minimizing unwanted motion blur, which is particularly beneficial when filming while moving.

A user-friendly interface is another highlight of the HMX-E10WN/XAA. The camcorder features a 2.7-inch LCD touchscreen display, allowing for intuitive navigation through menus and settings. This touchscreen also makes it simpler to frame shots and review footage right on the device. The camcorder supports a variety of recording modes, including slow motion and time-lapse, adding creative possibilities for users to explore.

In terms of connectivity, the Samsung HMX-E10WN/XAA offers USB and HDMI outputs, enabling easy transfer of video files to computers or direct playback on HD televisions. The device is compatible with various SD/SDHC memory cards, allowing for expandable storage options to accommodate longer recording times.

Moreover, the HMX-E10WN/XAA boasts a stylish design, available in a range of colors, making it not only functional but also visually appealing. With its combination of technological features, user-friendly design, and portability, the Samsung HMX-E10WN/XAA stands out as a compelling choice for anyone looking to create stunning video content effortlessly. It's a device that encapsulates the essence of modern videography, providing both functionality and style.

Samsung HMX-E10WN/XAA manual Ventilation

Models: HMX-E10WN/XAA