using with a Windows computer
USING THE Intelli-studio PROGRAM
Using the
4UFQ$POOFDUJOHUIF64#DBCMF
1.Set “USB Connect: Mass Storage” and “1$4PGUXBSF0O” t 5IFTFBSFUIFEFGBVMUNFOVTFUUJOHT
2.Connect the camcorder to the PC with the USB cable.
t "OFXmMFTBWJOHTDSFFOBQQFBSTXJUIUIF*OUFMMJTUVEJPNBJO window.
t 5IFSFNPWBCMFEJTLXJOEPXBMTPBQQFBST
3.Click “Yes”. The video/photo uploading procedure starts. Click “Yes” to confirm.
t *GZPVEPOPUXBOUUPTBWFBOFXmMFTFMFDUi/P”
PC Software |
Off |
On |
1/1 |
To disconnect the USB cable
To disconnect the USB cable after completing the file transfer, you must follow these steps:
1.Click the “Safely Remove Hardware icon” icon on the taskbar.
2.Select “USB Mass Storage Device,” and then click “4UPQ”
3.If the “Stop a Hardware device” window appears, click “0,”
4.Disconnect the USB cable from the camcorder and PC.
t 6TFUIFQSPWJEFE64#DBCMF
t %POUBQQMZFYDFTTJWFGPSDFXIFOJOTFSUJOHPSFYUSBDUJOHUIF64#DBCMFJOUPGSPNB64#KBDL
t .BLFTVSFZPVJOTFSUUIF64#QMVHJOUPUIF64#KBDLXJUIUIFQMVHGBDJOHJOUIFDPSSFDUEJSFDUJPO t 6TFUIF"$QPXFSBEBQUPSUPQPXFSUIFDBNDPSEFSXIFOUSBOTGFSSJOHmMFTUPZPVSDPNQVUFS
t 8IFOUIF64#DBCMFJTDPOOFDUFEUVSOJOHUIFDBNDPSEFSPOPSPGGNBZDBVTFUIF1$UP malfunction
t *GZPVEJTDPOOFDUUIF64#DBCMFGSPNUIF1$PSUIFDBNDPSEFSXIJMFUSBOTGFSSJOHUIFEBUB transmission will stop and the data may be damaged.
t *GZPVDPOOFDUUIF64#DBCMFUPB1$WJBB64#)6#PSTJNVMUBOFPVTMZDPOOFDUUIF64#DBCMF along with other USB devices, the camcorder may not work properly. If this occurs, remove all USB devices from the PC and reconnect the camcorder.
t *OUFMMJTUVEJPQSPHSBNNBZOPUBVUPNBUJDBMMZSVO*GUIJTPDDVSTBDDFTT.Z$PNQVUFSPS8JOEPXT Explorer, open the drive that corresponds to your camcorder, and then run IStudio.exe.
