75
Recording
Symptom Explanation/Solution
The recording stops
automatically.
There is no more free space for recording on the storage media.
Back up important files on your PC and format the storage media
or delete unnecessary files.
If you use a memory card with a low write speed, the camcorder
automatically stops recording videos and the corresponding
message appears on the LCD screen.
•
•
When recording a subject
illuminated by bright light, vertical
lines appear.
The camcorder is unable to record these levels of brightness.•
When the screen is exposed to
direct sunlight during recording,
the screen turns red or black for
an instant.
Do not leave the camcorder with the LCD screen exposed to
direct sunlight.
•
The beep sound is not heard.
Set the "Beep Sound" to "On." page 56
The beep sound is temporally off while recording videos.
When the Audio/Video cable is connected to the camcorder, the
beep sound automatically turns off.
•
•
•
There is a time difference between
the point where you press
Recording start/stop (
) button and the point where the
recorded video starts/stops.
On your camcorder, there may be a slight time delay between
the point when you press Recording start/stop ( ) button
and the actual point where the recorded video starts/stops. This
is not an error.
•
You cannot record a photo.
Set your camcorder to Record mode. page 20
Release the lock on the write-protection tab of the memory card
if set.
The storage media is full. Use a new memory card or format the
storage media. page 53
Or delete unnecessary images. page 47
•
•
•