28
INSTALLATION OF THE WATER DISPENSER LINE
SEPARATION
OF RED CAP
STICKER
(MONTH INDICATION)
COVER FILTER
ALIGN THE INDICATION MARK
WITH LOCK POSITION.
1) As shown, the fixed cap separates from the refrigerator by rotat-
ing it counterclockwise.
Remove the water filter from the box and put a month indicator
sticker on the filter as shown.
2) If the water filter was installed in March, put on the "SEP" sticker.
3) Remove the protective cap then position and insert the
filter as shown.
4) Slowly turn the water filter clockwise 90º to align
the indication mark on the cover, locking the filter in posi-
tion. Do not overtighten.
Please check that the indication line aligns with the lock position.

Install the water filter.

NOTE
1) Slip the compression nut and plastic ferrule
through the plastic tube.
2) After inserting the sleeve,tighten the compres-
sion nut onto 1/4” compression fitting(union).

Connect the water tube to the refrigerator.

Water line must be connected to

drinkable water only.

NOTE

Do not overtighten the compression

nut.

NOTE

Keep the cap(A) in a safe place for recapping,

when you will not use the filter.

NOTE
3) Slip the compression ferrule and nut on cop-
per (or plastic) tubing as shown.
Tighten the compression nut onto the com-
pression fitting(union).
4) Turn water on and check for any leakege.
Compression Nut
Compression fitting
Sleeve
Compression Nut
Ferrule
Ferrule
(A)
DA68-01174A 12/13/02 12:57 PM Page 28