26
ADJUST THE CLEARANCE BETWEEN THE DOORS

Making small level adjustments between doors.

If the door of the freezer is lower than that of the
refrigerator. If the door of freezer is higher than that of the
refrigerator.
3) After adjusting the doors, turn the nut (①) clockwise( ) until the lower end of the bolt, then tighten the
bolt again with the wrench (➂) to fix the nut(①).
If you do not fix the nut (①)firmly, the bolt (➁) may be released.
2) Please adjust the height difference between the doors turning the bolt (➁) clockwise( ) or
counter
clockwise
( ).
When you turn clockwise ( ), the door goes up.
➂WRENCH
Adjustment location
➀NUT ➁BOLT
Adjustment location
➂WRENCH
➀NUT ➁BOLT
➀NUT ➁BOLT
➂WRENCH
➂WRENCH ➂WRENCH
➁BOLT ➁BOLT
Please open the doors and adjust the doors as follows:
1) Release the nut (①) on the lower hinge until the upper end of the bolt (➁).
When you release the nut(①), use enclosed hex wrench (➂) to turn the bolt(➁) a little counter-
clockwise.
Loosen the nut(①) with your finger.
➁BOLT
➂WRENCH
➀NUT
NOTE
NOTE
NOTE
DA68-01174A 12/13/02 12:57 PM Page 26