ENGLISH
REMOTE OPERATIONS
This section is ONLY FOR | Remote sensor |
Before using the remote controller:
• Aim the remote controller directly at the remote sensor on the main unit. Make sure there is no obstacle in between.
• Do not expose the remote sensor to strong light (direct sunlight or artificial lighting).
Installing the battery
When the controllable range or effectiveness of the remote controller decreases, replace the battery.
| 1. Remove the battery holder. | ||
(back side) |
| 1) Push out in the direction indicated by the arrow | |
1) |
| using a ball point pen or a similar tool. | |
| 2) | 2) Remove the battery holder. | |
Lithium coin battery | 2. | Place the battery. | |
(product number: | |||
| Slide the battery into the holder with the + side facing | ||
CR2025) |
| ||
| upwards so that the battery is fixed in the holder. | ||
|
| ||
| 3. Return the battery holder. | ||
(back side) |
| Insert again the battery holder pushing it until you hear | |
|
| a clicking sound. |
WARNING:
• Store the batteries in a place which children cannot reach.
If a child accidentally swallows the battery, immediately consult a doctor.
•Do not recharge, short, disassemble or heat the batteries or dispose of in a fire. Doing any of these things may cause the batteries to give off heat, crack or start a fire.
•Do not leave the batteries with other metallic materials.
Doing this may cause the batteries to give off heat, crack or start a fire.
•When throwing away or saving the batteries, wrap in tape and insulate; otherwise, , it may cause the batteries to give off heat, crack or start a fire.
•Do not poke the batteries with tweezers or similar tools.
Doing this may cause the batteries to give off heat, crack or start a fire.
22