Troubleshooting
4-16 Samsung Electronics
4-2 Adjustment

4-2-1 Service Instruction

"Before Performing After Sales Services
1. Check if the measurement and test equipment is working properly.
2. Secure sufficient work space for disassembling the product.
3. Prepare a soft pad for disassembling the product.
"Service adjustment item after replacement of Board
<If adjustment equipment is available>
#PDP Option of Factory Mode )set the Factory Data Type item as the suitable value of relevant model.
$Adjust Calibration of Factory Mode for each mode.
%Adjust White Balance of Factory Mode.
<If adjustment equipment is not available>
#Write down the value of HDMI White Balance of Factory Mode before replacing Board.
$PDP Option of Factory Mode )set the Factory Data Type item as the suitable value of relevant model.
%Set the value of HDMI White Balance with the value written down before.