Schematic Diagram
Samsung Electronics 7-1
7. Schematic Diagram

7-1 Circuit Description

Y Main Board
PDP Panel
Logic Board
Main Board
SMPS Board
X Main Board
CPU
Deco der
Vide o
Deco der
Vide o
S/W
Speaker
Out
Audi o
Proc ess or
A/D
Conv ert er
LVDS
Tran s
Imag e
Enha nce r Deinterlac er
Imag e
Scal er
TMDS
Rece ver
LVDS
Mico m
Tune r RF
Spli tte r
42” - 1024x768 Pixels
1024x768x3 Cells (R,G,B)
50” - 1365x768 Pixels
1365x768x3 Cells (R,G,B)
Main SMPS
AC Power
Source
Address Buffer
Y-Pulse
Generator
X-Pulse
Generator
Input
Data
Processor
Data
Controller
DRAM
Driver
Timing
Controller
Display
Data
Display
Timing
Row
Driver
Scan
Timing
!SMPS Board
The SMPS used for the PDP has been designed to be efficient, compact and lightweight. For VS and VA outputs, a LLC converter
has been used. For the other outputs, a Flyback converter has been used.
!LOGIC Board
The logic circuit consists of a Logic Main Board and an Address Buffer Board. The Logic Main Board decodes the video signal
encoded by the Video Board, outputs the ADDRESS data signal for each pattern and generates X and Y drive signals. The
Address Buffer Board buffers and transfers the ADDRESS data output signal using TCP IC.
- LVDS with built-in video signal processing (W/L, error diffusion, APC, FCR, etc.) applied and 1 ASIC chip.
- Outputs the address Drive IC control and data signals to the Buffer Board.
- Outputs the control signal for the X and Y Drive Boards.
- Monitors major drive voltages (Micom Circuit Block); detects if a surge voltage has been applied and protects the Drive Circuit.
- Temperature Adaptive Operating Mode (Low Temperature/Room Temperature/High Temperature); Discharge optimization for
each temperature level.
!X-MAIN Board
Connects to the X terminal block, 1) provides maintaining voltage waveform (including ERC), and 2) maintains the Ve bias in the
Scan section.
!Y-MAIN Board
Connects to the Y terminal block, 1) provides maintaining voltage waveform (including ERC), 2) provides Y Rising, Falling Ramp
waveforms, and 3) maintains the Vscan bias.
!Address Buffer Board
It delivers the data signal and control signal to the TCP.