Samsung HT-A100 Hdmi Function, resolution Selection, Using Anynet+HDMI-CEC, connections

connections

HDMI FUNCTION

resolution Selection

This function allows the user to select the screen resolution for HDMI output.

In Stop mode, press and hold the SD/HD (Standard

Defi nition/High Defi nition) button on the remote control for longer than 5 seconds.

~ Resolutions available for the HDMI output are 480p, 720p, 1080i/1080p.

~SD(Standard Defi nition) resolution is 480p and HD (High Defi nition) resolution is 720p, 1080i/1080p.

The default value of HDMI output is 480P.

M ` If the TV does not support the configured resolution, you will
	Why use HDMI (High Definition
not be able to see the picture.
	Multimedia Interface)?
` When an HDMI cable is connected, composite and component
	This device transmits a DVD video
video signals are not output.
	signal digitally without the process
` See your TV owner's manual for more information on how to select	of converting to analog. You will get
the TV's Video Input source.	sharper digital pictures when using
	an HDMI connection.

Using Anynet+(HDMI-CEC)

Anynet+ is a function that enables you to control other Samsung Devices with your Samsung TV's remote control, Anynet + can be used by connecting this Home Theater to a SAMSUNG TV using an HDMI Cable. This is only available with SAMSUNG TVs that support Anynet+.

1.Connect the main unit of the Home Theater to a Samsung TV with an HDMI cable. (See page 18)

. Set the Anynet+ function on your TV.		With Anynet+
(See the TV instructions manual for more information.)
		You can operate this unit, power
~ You can operate the Home Theater by using the TV
		on your TV, or watch a movie by
remote control. (Available TV buttons : , , ,	,
		pressing the Play button on your
, and , buttons, ~ button)
		Samsung TV's remote control.

If you select the TV
Set the Anynet+(HDMI-CEC) to On by pressing the Anynet+
button on your TV.
• receiver : On : You can listen to audio through the Home Theater.
• receiver : Off : You can listen to audio through the TV.
If you select the THEATEr
Select THEATEr to connector and set the option of each items below.
• View TV : If Anynet+(HDMI-CEC) is set to on and you select	MOVE	ENTEr	EXIT
View TV, the Home Theater will automatically switch
to DIGITAL IN mode.
~ THEATEr Menu : You can access and control the Home
Theater menu.
~ THEATEr Operation : The Home Theater disc playback
information will be displayed. You
can control the Disc operation of the
Home Theater such as title, chapter	MOVE	ENTEr	EXIT
and subtitle change.

~receiver : On : You can listen to audio through the Home Theater.

~receiver : Off : You can listen to audio through the TV.

M ` The Theater function is available only when you listen to the audio through the Home Theater with the digital optical cable connected.

0