Samsung HT-AS720S Setting Dolby Pro Logic llx effect Setting NEO6 mode, Using the Effect button

Setting Dolby Pro Logic llx effect

Setting NEO:6 mode

ENG

This function works only in Dolby PRO LOGIC IIx MUSIC Mode.

1 Press SETUP/MENU button, and then press the ENTER button.

•“SETUP MODE” appears on the display and goes into Setup Mode.

2 Press button to select the “ MODE”, and then press the ENTER button.

3 Press button.

• Each time you press this button,

C-WIDTH ➝ DIMENSION ➝ PANORAMA will be selected in turn.

4 Press …† button to set the Dolby Pro Logic llx effect you want.

To exit setup mode

• Wait for about 5 seconds or press SETUP/MENU button. “SETUP OFF” appears on the display and Setup Mode is exited.

Using the EFFECT button

1 Press MODE button to select ‘MUSIC’ Mode.

2 Press EFFECT button.

•Each time you press this button, C-WIDTH ➝ DIMENSION ➝ PANORAMA

will be selected in turn.

3 Press …† button to select Dolby Pro Logic IIx effect you want.

• C-WIDTH : You can set from 0 to 7.

• DIMENSION : You can set from -7 to +7.

• PANORAMA : You can set it ON or OFF.

Dolby Pro Logic llx effect

•C-WIDTH : This sets the width of the center image. The higher the setting, the less sound comes from the center speaker.

•DIMENSION : Incrementally adjusts the sound field (DSP)from the front or surround.

•PANORAMA : This mode extends the front stereo image to include the surround speakers for an exciting "wraparound" effect with side wall imaging.

You can play back 2 channel sound over 6.1 channels when enjoying music or a movie.

REMOTE CONTROL

Press NEO:6 MODE button.

•Each time you press this button, MUSIC ➝ CINEMA will be selected in turn.

MAIN UNIT

1 Press SURROUND button briefly to select “NEO:6” mode.

• Each time you press this button, DPLIIx ➝ NEO:6 ➝ SFE ➝ STEREO will be selected in turn.

2 Press SELECT(		,	) button.
• Each time you press this button, MUSIC ➝ CINEMA will be selected in turn.
To set the height of the center sound image
If your TV (or screen) is installed high on a wall, you can raise the center				OPERATION
2 Press	button to select the “NEO:6 MODE”, and then
sound image of the front and center speakers to compensate.

1 Press SETUP/MENU button, and then press the ENTER button.

• “SETUP MODE” appears on the display and goes into Setup Mode.

press the ENTER button.

• “CEN -- IMG : 2” appears on the display.

3 Press …† button to set the sound image you want.

• You can set the sound image from 0 to 5.

• This parameter adjusts the height of the center image through the front and center speakers. “0” is the lowest while “5” is the highest.

To exit setup mode

• Wait for about 5 seconds or press SETUP/MENU button. “SETUP OFF” appears on the display and Setup Mode is exited.

NEO : 6 Mode

This mode decodes 2 channel signals to a high precision digital matrix decoder. for 6.1 channel sound.

•MUSIC : NEO:6 MUSIC mode is optimized for music playback

•CINEMA : NEO:6 CINEMA mode is optimized for movie playback.

• NEO:6 mode cannot be used with DTS and Dolby Digital multi channel signals.

•Pro Logic works only for PCM audio signals with sampling frequencies of 32KHz, 44KHz or 48KHz.

30 31