Samsung HT-BD7200 user manual Sound Virtual Sound, DSp Function, Audio Setup

Setting the Sound edit

4.Press the ▲▼ buttons to select Sound edit, then press the enteR or ► button.

5.Press the ▲▼ buttons to select the desired Speaker, then press the ◄► button to adjust the settings.

6.When done, use the ▲▼◄► buttons to select Save, then press the enteR button.

If you don’t want to save your settings, use the ▲▼◄► buttons to select Cancel, then press the enteR button.

	Pandora			aV Sync	: 50msec
				test tone
		System Setup
	Disclaimer
		Language Setup		Speaker distance
dVd	Setup	Audio Setup	◄	Sound edit	►

Display Setup

HDMI Setup

Network Setup

Parental Setup

M  Press the RETURN butt on to return to the previous menu.

adjusting Front Speaker Balance

•You can select between 0, -6, and OFF.

•The volume decreases as you move closer to –6.

adjusting Subwoofer Speaker level

•The volume level can be adjusted in steps from +6dB to 6dB.

•The sound gets louder as you move closer to +6dB and quieter as you get closer to -6dB.

V-Sound (Virtual Sound)

Produces realistic sound through 2-channel audio with the aid of virtual effects, this gives the user thefeeling they are listening to 5.1 channel audio.

Press the V-Sound button.

• Each time the button is pressed, the selection changes as follows :

V.Sound on ➝ V.Sound oFF

dSp Function

Press the dSp button.

• Each time the button is pressed, the selection changes as follows:

SMaRt Sound ➝ audio upSCale ➝ poWeR BaSS ➝ dSp Mode oFF

•SMART SOUND : This will regulate and stabilize the volume level against a drastic volume change when changing channels or during a scene transition.

•AUDIO UPSCALE : This also helps enhance your sound experience (ex. mp3 music). You can upscale your MP3 level sound(24 kHz, 8bit) to CD level sound(44.1 kHz, 16bit).

•POWER BASS : POWER BASS function stresses low tones providing thudding sound effects.

eng

● audio Setup

39