Setting UP the Network Setup Options

To obtain information on the proper settings, check the network settings on your computer or contact your Internet provider.

To set the network of your Blu-ray Home Theater, follow the steps below.

1.	With the unit in Stop mode/No Disc mode, press the
1.	With the unit in Stop mode/No Disc mode, press the		Pandora
	MENU button.		Disclaimer	Display Setup
				Display Setup
2.	Press the ▲▼ buttons to select Setup, then press the			HDMI Setup
2.	Press the ▲▼ buttons to select Setup, then press the	dVd	Setup	◄ Network Setup ◄
	ENTER or ► button.			Parental Setup
	ENTER or ► button.

3.Press the ▲▼ buttons to select Network Setup, then press the ENTER or ► button.

4.Press the ▲▼ buttons to select the desired network option from the options described below, then press the ENTER or ► button.

5.Press the ▲▼ buttons to select the desired item, then press the ENTER button. Each network option is described in detail below.

Network Selection

● netWoRK Setup

Select Cable or Wireless as the method to connect to network.

To setup, follow steps 1~3 above.

4.Press the ▲▼ buttons to select Network Selection, then press the ENTER or ► button.

•Cable : Select this to connect to the network using a cable. (see page 28)

•Wireless : Select this to connect to the network wirelessly. (see page 29)

To setup, follow steps 1~3 above.

4.Press the ▲▼ buttons to select Cable Network, then press the ENTER or ► button.

5.Press the ▲▼ buttons to select DHCP, then press the ENTER button.

M  If DHCP is set to On, you can't select IP Address, Subnet Mask or Gateway.

If DNS is set to Auto, you can’t select Primary/ Secondary DNS.