Samsung HT-C453N/UMG Speaker Components, Installing the Speakers on the Tallboy Stand, 1 English

Connections

Connecting the Speakers

Speaker Components

(L) (R)

FRONT

(L) (R)

REAR

SCREW (5x15): 4EA

SCREW (4x20): 16EA CENTRE SPEAKER

STAND

CENTRE 

STANDBASE	SUBWOOFER	FRONT/REAR SPEAKER	SUBWOOFER
	SPEAKERCABLE

Installing the Speakers on the Tallboy Stand

1.Turn the Stand Base upside-down and connect it to the Stand.

2.Insert small screws (4*20, For connecting Stand & Stand Base) clockwise into the four holes marked using a screwdriver as shown in the illustration.

!CAUTION : When you use a torque screwdriver, be careful not to put exces- sive force. Otherwise, it runs idle or can be damaged. (torque screwdriver- below 15 kg.f.cm

3.Connect the upper Speaker to the assembled Stand.

4.Insert another large screw (5*15, For connecting Speaker & Stand) clockwise into the hole on the rear of the speaker using a screwdriver.

5.This is the appearance after the speaker is installed. Follow this steps to install other speaker.

1
	Stand
	Base
	Stand
3	Speaker

Stand

5

1 English