5
ENGLISH
REMOTE CONTROL
CH
VOL
VOL
CH
RECALL
TV/VIDEOMUTE
R-TUNE
POWER
1
2
3
6
7
8
9
4
5
Remote control
Part No. EUR7713020
1. POWER - Press to turn the TV on. Press again to turn the
TV off.
2. ACTION - Press to display the On-screen menu function.
And also, press to enter or select information for On-Screen
operations.
3. VOL (VOLUME) / - Press to increase, or to
decrease the volume level. And also, press to select the
desired setting during On-Screen operations.
4. MUTE - To turn off the sound, press this button once. The
TV will be silenced and the symbol "MUTE" will appear on
the screen. The muting feature can be released by pressing
MUTE again or one of the VOL or .
5. Direct Channel Selection (0-9) - Allows direct access to
any channel.
6. R-TUNE - This button allows you to go back to the previous
channel selected by just pressing R-TUNE. Press this button
again to return to the channel you were watching.
7. CH (CHANNEL) / - Press to change to a higher num-
bered channel set into memory. Press to change to a lower
numbered channel set into memory. And also, press to select
the desired setting during On-Screen operations.
8. TV/VIDEO - Switches between TV and external input.
9. RECALL - When you press this button, the channel number
will appear in the upper right corner of the screen. Press the
button again to remove display from the screen.
Before using the remote control transmitter, batteries must first be installed.
2. Install two "AA" (penlight size) batteries.
3. Replace the battery compartment cover.
Use two "AA" size penlight batteries (supplied) for the
transmitter. The batteries may last approximately one year
depending on how much the remote control is used. For best
performance, it is recommended that batteries should be replaced
on a yearly basis, or when the remote operation becomes erratic.
Do not mix old and new batteries or different types.

BATTERY PRECAUTIONS

These precautions should be followed when using batteries in
this device:
1. Use only the size and type of batteries specified.
2. Be sure to follow the correct polarity when installing the
batteries as indicated in the battery compartment. Reversed
batteries may cause damage to the device.
3. Do not mix different types of batteries together (e.g. Alkaline
and Carbon-zinc) or old batteries with fresh ones.
4. If the device is not to be used for a long period of time,
remove the batteries to prevent damage or injury from
possible battery leakage.
5. Do not try to recharge batteries not intended to be recharged;
they can overheat and rupture.
(Follow battery manufacturer's directions.)
1. Slide the battery compartment cover.

HOW TO INSTALL BATTERIES

TO USE AC POWER SOURCE
Use the AC polarized line cord provided for operation on AC. Insert the AC cord plug into a standard 120V 60Hz polarized AC outlet.

POWER SOURCE

NOTES:
1. Never connect the AC line cord plug to other than the specified voltage (120V 60Hz).
Use the attached power cord only.
2. If the polarized AC cord does not fit into a nonpolarized AC outlet, do not attempt to file
or cut the blade. It is the user's responsibility to have an electrician replace the obsolete
outlet.
3. If you cause a static discharge when touching the unit, and the unit fails to function,
simply unplug the unit from the AC outlet, wait a few minutes, and plug it back in.
The unit should return to normal operation.
Wider Hole
and Blade
AC outlet
Polarized AC Cord Plug
(One blade is wider than
the other)
3N42201A E Cover-P08 08/07/2003, 12:515