Panasonic CT-2701 owner manual Troubleshooting Guide, Specifications

TROUBLESHOOTING GUIDE

Before requesting service, please refer to the following chart for the symptom and possible solution.

SYMPTOMS	POSSIBLE SOLUTIONS
	• Make sure the power cord is plugged in.
TV does not operate	• Try another AC outlet.
	• Power is off, check fuse or circuit breaker.
	• Unplug unit for an hour, then plug it back in.
Poor sound or No sound	• Station or CATV experiencing problems, tune to another station.
	• Check sound adjustments (VOLUME and MUTE).
	• Check for sources of possible interference.
	• Station or CATV experiencing problems, tune to another station.
	• Make sure channels are set into memory.
Poor picture or No picture	• Check antenna or CATV connections, adjust antenna.
	• Check for sources of possible interference.
	• Check picture control adjustments.
	• Station or CATV experiencing problems, tune to another station.
Poor reception on some channels	• Make sure channels are set into memory.
	• Station is weak, adjust antenna to receive desired station.
	• Check for sources of possible interference.
	• Station or CATV experiencing problems, tune to another station.
	• Make sure channels are set into memory.
Poor color or no color	• Check picture control adjustments.
	• Check antenna or CATV connections, adjust antenna.
	• Check for sources of possible interference.
	• Station or CATV experiencing problems, tune to another station.
Picture wobbles or drifts	• Make sure channels are set into memory.
	• CATV company is scrambling signal.
	• Adjust antenna.
	• Check all CATV connections.
No CATV reception	• Set TV/CATV menu option to the CATV mode.
	• Station or CATV system problems, try another station.
Horizontal or diagonal bars on screen	• Check antenna connections, adjust or re-direct antenna.
	• Check for sources of possible interference.
No reception above channel 13	• Make sure TV/CATV menu option is in the appropriate mode.
	• If using antenna, check UHF antenna connections.
	• Batteries are weak, dead or inserted incorrectly.
No Remote operation	• Remote is out of range, move closer to TV (within 15 feet).
	• Make sure Remote is aimed at sensor.
	• Confirm there are no obstructions between the Remote and the TV.
	• Make sure the power cord is plugged in.
TV shuts off	• No broadcast on station tuned.
	• Timer is set.
	• Power interrupted.
	• TV station experiencing problems or program tuned is not closed
	captioned. Try another channel.
Cannot see closed caption	• Check CATV connection or VHF/UHF antenna, reposition or rotate
	antenna.
	• Select the Closed caption.
Display is not shown in your language	• Select proper language in the SET UP mode.

SPECIFICATIONS

AC Power Input:		120V, 60Hz	Receiving Channels:
AC Power Consumption:		125 Watts	VHF				2-13
Chassis Construction:		IC Solid state	UHF				14-69
Picture Tube:		27" (measured diagonally)	CATV				1-125
Horizontal resolution:		260 lines	Antenna Input Impedance:		75 Ohm (VHF/UHF/CATV) Coaxial Input
Audio Power Output Rating:		1.5 + 1.5 Watts	Inputs/Outputs: S-Video:		Y-Input:	1.0	Vp-p/75 ohms
Speaker:		2" x 3-1/2" Full Range, 8 ohms x 2			C-Input:	0.3	Vp-p/75 ohms
Tuner Type:	181 Channel, Quartz PLL Frequency			Video:		In(RCA) 1.0	Vp-p/75 ohms
		Synthesized			Out(RCA) 1.0		Vp-p/75 ohms
Remote Control:	Infrared, Direct Access, 2 x AA batteries			Audio:		In(RCA)-8 dBm/50 K ohms
		(supplied)		Antenna:		Out(RCA)-8 dBm/1 K ohms
			Dimensions:		VHF/UHF IN 75 ohms coaxial
				25-9/16" (W) x 19-11/16" (D) x 22-1/2" (H)
			Weight:				80.5 Ibs

ACCESSORIES

Remote Control

Batteries (AA) x 2

ENGLISH

11