Samsung HT-D5300 user manual Wireless Network, Press the Enter button to select IP Mode

To enter the Network settings into your product, follow these steps:

1.Press the ▲▼ buttons to select Wired, and then press the ENTER button.

2.Press the ◄► buttons to select IP Settings, and then press the ENTER button.

Settings

Display		IP Settings
Audio	IP Mode				Manual
Network	IP Address		0	.	0	.	0	0
System	Subnet Mask			.		.
			0		0		0	0
Language	Gateway		0	.	0	.	0	0
Security	DNS Mode				Manual
	DNS Server		0	.	0	.	0	0
General

Wireless Network

You can setup a wireless network three ways:

•Wireless (General)

•Using WPS(PBC).

•One Foot Connection

Wireless (General) includes both Automatic and Manual setup procedures.

Setting Up the Wireless Network Connection - Auto

Most wireless networks have an optional security system that requires devices that access the

03 Setup

Support

OK

m Move Number " Enter ' Return

network to transmit an encrypted security code called an Access or Security Key. The Security Key is based on a Pass Phrase, typically a word or a series of letters and numbers of a specified

3.Press the ENTER button to select IP Mode.

4.Press the ▲▼ buttons to select Manual, and then press the ENTER button.

5.Press the ▼ button to go to the first entry field (IP Address).

6.Use the number buttons on your remote to enter numbers.

7.When done with each field, press the ► button to move successively to the next field. You can also use the other arrow buttons to move up, down, and back.

8.Enter the IP Address, Subnet Mask, and Gateway values.

9.Press the ▼ button to go to DNS Mode.

10.Press the ▼ button to go to the first DNS entry field. Enter the numbers as above.

11.Press the ENTER button to select OK. The Network Status screen appears. The product connects to the network after the network connection is verified.

length you were asked to enter when you set up security for your wireless network. If you use this method of setting up the network connection, and have a Security Key for your wireless network, you will have to enter the Pass Phrase during the Auto setup process.

1.Press the ▲▼ buttons to select Wireless (General).

Settings

Display		Network Settings
Select a network connection type.
Audio
Network	Wired
System Wireless		Set up wireless network by selecting your Wireless
Language (general)
Security	WPS(PBC)	Router. You may need to enter security key depending
		on the setting of the Wireless Router.

General One Foot

Support Connection

> Move " Enter ' Return

2.Press the ENTER button.

When done, it displays a list of the available networks.

3.Press the ▲▼ buttons to select the desired network, and then press the ENTER button. The Security screen appears.

English 39

HT-D5300_XAA_0125.indd 39 2011-01-25 ￿￿ 12:01:59