Installing the Speakers on the Tallboy Stand

02

*HT-D553 only - Front Speakers

*HT-D555 only - Front/Surround Speakers

1.Turn the Stand Base upside-down and connect it to the Stand.

2.Insert small screws (4*20, For connecting Stand & Stand Base) clockwise into the four holes marked using a screwdriver as shown in the illustration.

!CAUTION : When you use a torque screwdriver, be careful not to put excessive force. Otherwise, it runs idle or can be damaged. (torque screw- driver- below 15 kg.f.cm)

3.Connect the upper Speaker to the assembled Stand.

4.Insert another large screw (5*15, For connecting Speaker & Stand) clockwise into the hole on the rear of the speaker using a screwdriver.

1

Stand

Base

Stand

2

3 Speaker

Stand

4

Connections

5. This is the appearance after the speaker is installed. Follow this steps

5

 

 

 

 

to install other speaker.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

English 17

HT-D550-XU-ENG-0303.indd 17

 

 

2011-03-04 �� 3:04:22