Samsung HT-D555K/XV manual Hdmi Auto Detection Function, Using Anynet+HDMI-CEC,  English

Connections

HDMI FUNCTION

HDMI Auto Detection Function

If your TV is Samsung TV and it supports CEC function.The product's video output will automatically change to HDMI mode when connecting an HDMI cable while power is on.

~HDMI (High Defi nition Multimedia Interface)

~HDMI is an interface that enables the digital transmission of video and audio data with just a single connector. Using HDMI, the product transmits a digital video and audio signal and displays a vivid picture on a TV having an HDMI input jack.

~HDMI connection description

-HDMI outputs only a pure digital signal to the TV.

-If your TV does not support HDCP (High-bandwidth Digital Content Protection), random noise appears on the screen.

~What is the HDCP?

~HDCP (High-band width Digital Content Protection) is a system for protecting DVD content outputted via HDMI from being copied. It provides a secure digital link between a video source (PC, DVD. etc) and a display device (TV, projector. etc). Content is encrypted at the source device to prevent unauthorized copies from being made.

Using Anynet+(HDMI-CEC)

Anynet+ is a function that enables you to control other Samsung Devices with your Samsung TV's remote control. Anynet + can be used by connecting this product to a SAMSUNG TV using a HDMI Cable. This is only available with SAMSUNG TV's that support Anynet+.

1.Connect the product to a Samsung TV with an HDMI cable. (See page 21)

2.Set the Anynet+ function on your TV. (See the TV instruction manual for more information.)

✎NOTE

`The Anynet+ function supports some buttons of the remote control.

`This function is not available if an HDMI cable does not support CEC.

`Depending on your TV, certain HDMI output resolutions may not work. Please refer to the user’s manual of your TV.

`Please check the logo (If your TV has an logo, then it supports Anynet+ function.)

Connecting the fm Antenna

O

AUX

IN 2

COMPONENT

OUT

FM Antenna (supplied)

1.Connect the FM antenna supplied to the FM Antenna jack.

	FM ANT
	2. Slowly move the antenna wire around until you fi nd a
(Only For Service)	location where reception is good, then fasten it to a wall
FA NET
	or other rigid surface.

✎NOTE

` This product does not receive AM broadcasts.

English