Samsung HT-D6750W/EN, HT-D6750W/TK, HT-D6750W/XN, HT-D6750W/ZF, HT-D6750W/XE manual Wireless Network

Setup

To enter the Network settings into your product, follow these steps:

1.Press the ▲▼ buttons to select Wired, and then press the ENTER button.

2.Press the ◄► buttons to select IP Settings, and then press the ENTER button.

Wireless Network

You can setup a wireless network three ways:

•Wireless (General)

•Using WPS(PBC).

•One Foot Connection

Wireless (General) includes both Automatic and Manual setup procedures.

Settings

Display	IP Mode
Audio
Network	IP Address
System	Subnet Mask
Language	Gateway
Security	DNS Mode
	DNS Server
General
Support

IP Settings

Manual

0 . 0 . 0 . 0

0 . 0 . 0 . 0

0 . 0 . 0 . 0

Manual

0 . 0 . 0 . 0

OK

>Move " Enter ' Return

Setting Up the Wireless Network Connection - Auto

Most wireless networks have an optional security system that requires devices that access the network to transmit an encrypted security code called an Access or Security Key. The Security Key is based on a Pass Phrase, typically a word or a series of letters and numbers of a specified

3.	Press the ENTER button to select IP Mode.
4.	Press the ▲▼ buttons to select Manual,
	and then press the ENTER button.
5.	Press the ▼ button to go to the first entry
	field (IP Address).
6.	Use the number buttons on your remote to
	enter numbers.
7.	When done with each field, press the ►
	button to move successively to the next field.
	You can also use the other arrow buttons to
	move up, down, and back.

length you were asked to enter when you set up security for your wireless network. If you use this method of setting up the network connection, and have a Security Key for your wireless network, you will have to enter the Pass Phrase during the Auto setup process.

1.Press the ▲▼ buttons to select Wireless (General).

Settings

Network Settings

Display

Select a network connection type.

8. Enter the IP Address, Subnet Mask, and

Audio

Network

System

Wired

	Gateway values.
9.	Press the ▼ button to go to DNS Mode.
10.	Press the ▼ button to go to the first DNS
	entry field. Enter the numbers as above.
11.	Press the ENTER button to select OK.
	The Network Status screen appears. The
	product connects to the network after the
	network connection is verified.

Wireless

Language(General)

Set up wireless network by selecting your Wireless

Security WPS(PBC) Router. You may need to enter security key depending on the setting of the Wireless Router.

General One Foot

Support Connection

> Move " Enter ' Return

2.Press the ENTER button.

When done, it displays a list of the available networks.

3.Press the ▲▼ buttons to select the desired network, and then press the ENTER button. The Security screen appears.

38 English

HT-D6750W_ELS_1227.indd 38 2011-12-27 ￿￿ 9:25:39