Samsung HT-DL100 Connections, TV System Selection, Before Using the DVD Player, Prepe, rations

Connections

AUX Connections Use these connections if necessary.

TV

Picture can be shown only when the TV’s video input connector (VIDEO

VIDEO IN IN) is connected to the VIDEO OUT connector.

Before Using the DVD Player

Your DVD player is capable of playing DVD, VCD, and CD discs.

User instructions may vary depending on the type of disc. Read the instructions carefully before use.

123

	Turn on the power	Select a video mode by	Press the DVD button
Prepe-	to your DVD player	pressing the TV/VIDEO	to select the DVD input
rations	and TV.	button.	function.
before	TV	TV/VIDEO	DVD
use

¥ The word INVALID appears on screen!

R-FRONT-L

L

R

6

SPEAKERS

External Analog

Components

AV OUT	VIDEO	S-VIDEO
Y/C

COMP.

VIDEO OUT

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

Audio Cable (Red/White)

If the external analog component has only one output jack, you may connect either L or R.

ANTENNA

AM

FM 75

COAXIAL

If this message appears on the TV screen while buttons are being operate, the operation is not possible with that particular disc.

¥If your TV model is not SAMSUNG, refer to “Remote Control Unit Setup” on page 26.

	TV System
TV System Selection	Zoom

Press the TV System button while in stop mode.

¥Each time the TV System button is pressed, “NTSC, PAL” are selected in this order.

Different countries use different types of TV broadcast systems, video, audio and channel systems.

Example : The player cannot playback PAL-encoded DVD with NTSC-TV.

	R	L	¥ Always connect the video and
	Connect to external equipment with		audio connection cables to the
			equivalent colored jack.
	analog output.
	Example: Video, TV, LDP, etc.
	Making Digital/Analog Input Selection
Remote Control	Press the AUX button and select AUX IN.
Main Unit	Press the Function button and select		AUX IN.

11

CD-R/RW playback compatibility

¥Your DVD player can also play CD-R and CD-RW discs recorded in digital audio format. When recording your own CD-R or CD-RW discs, make sure that the recording session is properly terminated, or they will not be playable. (Depending on disc properties and recording quality, some CD-R/RW may not be playable.)

¥CD-RW has a lower reflection rate than CD-R media and consequently it will take a longer to read CD-R discs.

¥CD-RW discs recorded at high speed tend to be difficult for the DVD player to read. If the recording speed for the CD-RW disc is not predetermined, write it at low speed.

12