Samsung HT-DS690 Settingthe Delay Time, Setting up the Speaker Delay Time, In Stop mode

43P~80P(DS690)-SEA 9/15/04 5:01 PM Page 56

Setting the Delay Time

If the speakers cannot be placed at equal distances from the listening position, you can adjust the delay time of the audio signals from the center and rear speakers.

In Stop mode,

1 press MENU button.

Press Cursor button

2 to move to ‘Audio’ and then press ENTER button.

Setting up the Speaker Delay Time

When 5.1CH Surround Sound is played, you can enjoy the best sound if the distance between you and each speaker is the same. Since the sounds arrive at the listening position at different times depending on the placement of speakers, you can adjust this difference by adding a delay effect to the sound of the Center Speaker and Surround Speakers.

Note

•With (Dolby Pro Logic II), the delay time may be different for each mode.

•With AC-3 and DTS, the delay time can be set between 00 and 15mSEC.

57