Connections
Speaker Components
SWA-5000
SCREW (5X15): 4EA | SCREW (5X20): 12EA |
FRONT/FRONT TOP | SURROUND |
STAND
STAND BASE
(L) | (R) | (L) | (R) |
SPEAKER CABLE
Wireless Receiver Module
Speaker |
|
Cable (2EA) | TX Card |
FRONT/FRONT TOP SURROUND | CENTRE | SUBWOOFER |
Installing the Speakers on the Tallboy Stand
1.Straighten the speaker cable and put it into the hole on the Stand Base .
2.Turn the Stand Base
3.Use the driver to combine the screws (5x20) on the 3 marked holes.
4.Connect the upper Speaker to the assembled Stand.
5.Insert a screw (5x15) clockwise into the hole on the rear of the speaker using a screwdriver.
6.This is the appearance after the speaker is installed.
Follow this steps to install other speaker.
1
3
5
2Stand Base
Stand
4
Speaker
Stand
6
or
16 English