2.Place the Wall Bracket on the wall so that the arrow side faces upward and use four screws (not included) to fix it on the wall. Drive the screws into a stud or into mollies for secure support. After the
NOTE
Screws for the wall bracket are not included. Purchase screws (and mollies) appropriate for your type of wall.
Make sure that the product is installed standing on the ground or hanging on the wall. Laying down the product on the ground may cause the product malfunction.
Attaching the Toroidal Ferrite Core to the Power Cord of the Subwoofer
If you attach a Toroidal ferrite core to the power cord of the Subwoofer, it will help to prevent RF interference from radio signals.
1. | Pull the fixing tab of the Toroidal ferrite core to | HDMI OUTHDMI IN 1HDMI IN 2 | (OPTICAL) |
|
|
| AUX IN |
| open it. |
| DIGITAL |
|
| AUDIO IN | |
2. |
|
| |
Make a loop twice in the power cable of the | DIGITAL | ONLY FOR | |
| subwoofer. | (OPTICAL) | UPDATE |
3. | Attach the Toroidal ferrite core to the Subwoofer | AUDIO IN | |
|
| ||
| power cord as the figure shows and press it until it |
|
|
| clicks. |
|
|
English 17
Started Getting 02