Level: Lets you adjust the relative |
loudness of each speaker from 6db |
to |
deep bass, you can increase the |
loudness of the subwoofer by 6db. |
Distance: Lets you adjust the |
relative distance of each speaker |
from the listening position up to 9 |
meters. The farther the distance, |
the louder the speaker will be. |
Test Tone: Lets you run the test |
tone function so you can test your |
adjustments. Setting Test Tone to |
When the product is attached to a digital TV, lets you adjust the audio
Audio Sync delay so that the audio syncs with the video. You can set the delay between 0 and 300 milliseconds.
Lets you select the
Downmixing with your stereo system. You
Mode can choose to have the product downmix to normal stereo or to surround compatible stereo.
Settings 04
On turns the Test Tone on. Setting |
it to Off turns it off. |
Lets you select which speakers you |
Wired
Network
For more information about Network Settings and network functions, see
Speaker |
Network
Selection | want active, either the TV's speakers |
or the home cinema's speakers. |
Settings
"Networks and the Internet" starting on page 20.
Lets you direct the sound from the |
TV to the Home Cinema speakers. |
Requires a HDMI connection and |
Network Test
Lets you test the Internet Protocol setup to see if it is working correctly.
an Audio Return Channel (ARC) |
Network
Lets you check whether a
compatible TV. |
Audio Return • When Audio Return Channel is |
Status
connection to the network and the Internet have been established.
Channel | set to Auto, the home cinema |
BD-Live
automatically selects either ARC |
Internet
Lets you allow or prohibit an Internet connection for the
or optical input as the audio |
source, depending on your |
connections. If Audio Return |
Channel is active, optical input |
does not work. |
Lets you set the Digital Output to |
match the capabilities of the AV |
Connection
Initial Settings
System
Lets you
Digital Output | receiver you’ve connected to the |
product. For more details, please | |
| refer to the digital output selection |
| table. (See page 32) |
Anynet+
Anynet+ is a convenient function that offers linked operations with other Samsung products that have the Anynet+ feature and lets you control those products with one
Lets you apply dynamic range |
control to Dolby Digital, Dolby Digital |
Plus, and Dolby TrueHD audio. |
Auto: Automatically controls the |
(HDMI-CEC)
Samsung TV remote. To operate this function, you must connect this product to an Anynet+ Samsung TV using a HDMI cable.
| dynamic range of Dolby TrueHD |
| audio, based on information in the |
Dynamic | Dolby TrueHD soundtrack. Also |
turns dynamic range control off for | |
Range Control | Dolby Digital and Dolby Digital Plus. |
BD Data
Lets you manage the contents you downloaded through a
You can view the information about the USB device you are using for
Off: Leaves the dynamic range |
uncompressed, letting you hear the |
original sound. |
On: Turns dynamic range control on |
for all three Dolby formats. Quieter |
sounds are made louder and the |
volume of loud sounds is reduced. |
Management
BD Live data storage including the storage space. You can also delete BD Live data and change the device.