Samsung HT-F9750W/XE manual Changed, Product is not, Default values, Then, press the Power button

	Symptom		Check/Remedy
The menu screen does		•	Are you using a disc that does not contain menus?
not appear even when the
menu function is selected.
The aspect ratio cannot be		•	You can play 16:9 Blu-ray/DVD discs in 16:9 Full mode, 4:3 Letter Box mode, or
changed.			4:3 Pan-Scan mode, but 4:3 Blu-ray/DVD discs are played in 4:3 ratio only. Refer
			to the Blu-ray Disc jacket and then select the appropriate function.
•	The product is not	•	Press and hold the remote control's 5 button for 5 seconds in STANDBY mode.
	working.		- Using the RESET function will erase all stored settings.
	(Example: The power		Do not use this unless necessary.
	goes out or a strange
•	noise is heard.)
	The Product is not working
	normally.
You have forgotten the		•	With no disc in the product, press and hold the product's 5 button for longer
rating level password.			than 5 seconds. INIT appears on the display and all settings will return to the
			default values.
			Then, press the POWER button.
			- Using the RESET function will erase all stored settings.
			Do not use this unless necessary.
Can't receive radio		•	Is the antenna connected properly?
broadcasts.		•	If the antenna's input signal is weak, install an external FM antenna in an area with
			good reception.
While listening to TV audio		•	If the OPEN/CLOSE ^ button is pressed while listening to TV audio using the
through the Product, no			D. IN or AUX functions, the Blu-ray/DVD disc functions are turned on and the TV
sound is heard.			audio is muted.
"Not Available" appears on		•	The features or action cannot be completed at this time because:
screen.			1. The Blu-ray/DVD disc's software restricts it.
			2. The Blu-ray/DVD disc's software doesn’t support the feature (e.g., angles)
			3. The feature is not available at the moment.
			4. You’ve requested a title or chapter number or search time that is out of range.
If the HDMI output is set to		•	Press and hold the 5 button on front panel for more than 5 seconds with no disc
a resolution your TV cannot			in the product. All settings will revert to the factory settings.
support (for example,
1080p), you may not see a
picture on your TV.
No HDMI output.		•	Check the connection between the TV and the HDMI jack of the product.
		•	Check if your TV supports 576p/480p/720p/1080i/1080p HDMI input resolution.
Abnormal HDMI output		•	If random noise appears on the screen, it means that TV does not support HDCP
screen.			(High-bandwidth Digital Content Protection).

07 Appendix

English 59