HT-H4550R

(L) (R)

(L) (R)

SCREW (5x15): 16EA

 

SPEAKER CABLE

FRONT / SURROUND

STAND

STAND BASE

CENTRE

SUBWOOFER

 

 

 

 

Installing the Speakers on the Tallboy Stand * HT-H4550R only - Front/Surround Speakers

1.

Turn the Stand Base upside-down and connect it to the Stand.

1 Stand Base

2

2.

Use the driver to combine the screws on the 3 marked holes.

 

 

 

 

 

 

 

Stand

 

03 Connections

3.Straighten a supplied speaker wire to the gravity direction and put in the hole on the centre of Stand Base.

4.Connect the upper Speaker to the assembled Stand.

5.Insert a screw clockwise into the hole on the rear of the speaker using a screwdriver.

And then connect a speaker cable.

6.This is the appearance after the speaker is installed.

Follow this steps to install other speaker.

34

Speaker

Stand

56

Connecting The Speakers

1.Match each speaker cable bundle to the correct speaker by matching the colour

2.

coded plug on each bundle to the coloured sticker on the bottom of each speaker.

 

 

To attach speaker wire to each speaker:

 

 

a. Press down the red tab on the back of the speaker, insert the red wire, and then

 

 

 

release the tab.

 

 

 

b. Press down the black tab on the back of the speaker, insert the black wire, and

Black

Red

3.

then release the tab.

 

 

Connect the speaker wire plugs from each speaker to the back of the product by

 

 

 

 

 

 

matching the colours of the speaker plugs to the colours of the speaker jacks.

 

 

English 13

Page 13
Image 13
Samsung HT-H4550R/XU, HT-H4550R/EN manual Connecting The Speakers, Speaker Cable, Front / Surround Stand Stand Base Centre