Using Bluetooth, To show the RDS signals, Playing Content

Playing Content

You can see the RDS signals the station sends on the display.

Press the RDS DISPLAY button while listening to an FM station.

●● Each time you press the button, the display change to show you the following information : PS NAME  RT  CT  Frequency

		While searching, <PS NAME>
	PS (Program	appears and then the station
	PS (Program	names will be displayed.
	Service)	names will be displayed.
	Service)	<NO PS> appears if no signal is
		<NO PS> appears if no signal is
		sent.

		While searching, <RT> appears
		and then text messages the
	RT (RadioText)	station sends will be displayed.
		<NO RT> appears if no signal is
		sent.

	Frequency	Station frequency (non-RDS
	Frequency	service)
		service)

When the display shows PS,or RT signals,the following characters are used.

●● The display window cannot differentiate upper case and lower case letters and always uses upper case letters.

●● The display window cannot show accented letters, <A,> for instance, may stands for accented <A’s> like <À, Â, Ä, Á, Å and Ã.>

One of the advantages of the RDS service is that you can locate a particular kind of program from the preset channels by specifying the PTY codes.

To search for a program using the PTY codes

●● Before you start!

-- The PTY Search is only applicable to preset stations.

-- To stop searching any time during the process, press 5 button while searching.

-- There is a time limit in doing the following steps. If the setting is cancelled before you finish, start from step 1 again.

-- When pressing the buttons on the primary remote control, make sure that you have selected the FM station using the primary remote control.

1.Press the PTY SEARCH button while listening to an FM station.

2.Press the PTY- or PTY+ button until the PTY code you want appears on the display.

●● The display gives you the PTY codes described to the right.

3.Press the PTY SEARCH button again, while the PTY code selected in the previous step is still on the display.

●● The centre unit searches 15 preset FM stations, stops when it finds the one you have selected, and tunes in that station.

Using Bluetooth

You can use a Bluetooth device to enjoy music with high quality stereo sound, all without wires!

Bluetooth is a technology that enables Bluetooth- compliant devices to interconnect with each other easily using a short, wireless connection.

●● A Bluetooth device may hum or malfunction:

-- When a part of your body is in contact with the receiving/transmitting system of the Bluetooth device or the Home Cinema.

-- When it is subject to electrical variation from obstructions caused by a wall, corner, or office partitioning.

-- When it is exposed to electrical interference from same frequency-band devices including medical equipment, microwave ovens, and wireless LANs.

●● Pair the Home Cinema with the Bluetooth device while the two are close together.

30 - English