Samsung HT-HDP40 instruction manual DVD Audio Disc Playback Mode

DVD Audio Disc Playback Mode

Some DVD-Audio discs contain DVD-Video as well as DVD-Audio.

To play back the DVD-Video portion of the DVD-Audio disc, set the unit to DVD-Video mode.

Setting the Speaker Mode ENG

Signal outputs and frequency responses from the speakers will automatically be adjusted according to your speaker configuration and whether certain speakers are used or not.

	Press the MENU		Press Cursor
			button to move to
	button while the
		2 ‘Setup’ and then
1 disc tray is open.
			press ENTER button.

3	Press Cursor	4	Press Cursor ,
	button to move to		button to move to
	‘DVD TYPE’ and then		‘DVD VIDEO’ and then
	press ENTER button.		press ENTER button.

In Stop mode,

1 press MENU

button.

In the Speaker

3 Setup, press the ENTER button again.

Press Cursor 2 button to move to ‘Audio’ and then

press ENTER button.

Press Cursor , ,

, buttons to move 4 to the desired

speaker and then press ENTER button.

Note

•Set steps 1 ~ 4 again if you want to switch to DVD AUDIO Play mode.

When Selecting DVD Play Mode:

• DVD VIDEO : set to play the DVD video

contents contained on a

•For C, SL, and SR, each time the button is pressed, the mode switches alternately as follows: SMALL ➝ NONE.

•For L and R, the mode is set to SMALL.

SETUP

•DVD Play mode is set to DVD Audio as factory default setting.

DivX (R) registration

DVD audio disc.

• DVD AUDIO : set to play the default

DVD audio.

SMALL : Select this when using the speakers.

NONE : Select this when no speakers are connected.

Note

• Please use the Registration code to register this player

49	with the DivX (R) video on demand format. To learn more,
	go to www.divx.com/vod.

•Depending on PRO LOGIC and STEREO settings, the speaker mode may vary (see page 59).

50