Samsung HT-P30 Setting the Test Tone, Press TEST TONE button, To end the test tone, In Stop mode

Setting the Test Tone

Use the Test Tone feature to check the speaker connections and to adjust the speaker levels.

In Stop mode,

1 pressbutton.MENU

Press Cursor 2 button to move to ‘Audio’ and then

press ENTER button.

Press Cursor button

3 to move to ‘TEST TONE’ and then press ENTER button.

•The test tone will be sent to L ➝ C ➝ R ➝ RS ➝ LS ➝ SW in that order.

If the ENTER button is pressed again at this time, the test tone will stop.

Press RETURN button to return to the previous level.

Press MENU button to exit the setup screen.

Alternate method: press the TEST TONE button on the remote.	L: Front Speaker (L)	C: Center Speaker	SW: Subwoofer
	R: Front Speaker (R)	LS: Rear Speaker (L)	RS: Rear Speaker (R)

Press TEST TONE button.

•Test tone will be produced as follows: When playing a DVD or CD, this will work only in Stop mode.

•Use this function to check that each speaker is correctly connected and that there is no problem.

47	To end the test tone,
	press TEST TONE button again.

Multi-Channel Pro Logic Mode

Start