![Connecting External Components](/images/new-backgrounds/22200/2220021x1.webp)
Connecting External Components
Connecting an External Digital / Analog Component
Example: Digital signal components such as a
Analog signal components such as a VCR.
Audio Cable | Optical Cable |
(not supplied) | (not included) |
If the external analog
component has only one
Audio Out, connect either left
or right.
1 Connect the Digital Input (OPTICAL) to the Digital Output on the external digital component.
2 Connect AUX (Audio) In on the Home Theater to Audio Out on the external analog component.
•Be sure to match connector colors.
3 Press AUX on the remote control to select ‘DIGITAL IN / AUX1/AUX2’ input.
•Each time the button is pressed, the selection changes as follows: AUX1 ➝ AUX2 ➝ DIGITAL IN
•You can also use the FUNCTION button on the main unit.
The mode switches as follows: DVD/CD ➝ DIGITAL IN ➝ AUX1➝ AUX2 ➝ USB ➝ FM ➝ XM
Cooling Fan | The cooling fan supplies cool air to the unit to prevent overheating. |
Please observe the following cautions for your safety.
• Make sure the unit is
• Do not obstruct the cooling fan or ventilation holes. (If the cooling fan or ventilation holes are covered with a newspaper or cloth, heat may build up inside the unit and fire may result.)
Connecting the FM Antenna | GB |
|
FM Antenna (supplied)
1 Connect the FM antenna supplied to the FM 75Ω COAXIAL terminal. | CONNECTIONS |
|
2 Slowly move the antenna wire around until you find a location where reception is good, then fasten it to a wall or other rigid surface.
Notes
• This unit does not receive AM broadcasts.
Connecting an optional XM Satellite Radio Antenna
Connect the XM Antenna(Sold separately) to the XM Antenna Connector on the rear of this unit.
Notes • To ensure optimal reception of XM’s satellite signal, the XM Antenna should be placed at or near a southerly facing window with nothing obstructing its path to the sky. You can mount it indoors or outdoors.
• When making connections, also refer to the operation instructions of the XM Antenna.
19 | Note | • You can connect the Video Output jack on your VCR to the TV, and connect the Audio |
|
| Output jacks on the VCR to this product. |
• Depending on your location, the radio signal may be weak or cannot be tuned .
20