Connecting External Component
Connecting an External Analog Component
Example: Analog signal components such as a VCR or TV.
Audio Cable
(not supplied)
If the external analog
component has only one Audio Out, connect either left or right.
1 Connect Audio In on the Home Theater to Audio Out on the external analog component.
•Be sure to match connector colors.
2 Press AUX on the remote control to select AUX input.
• You can also use the FUNCTION button on the main unit. The mode switches as follows: DVD/CD ➝ AUX ➝ FM.
Connecting the FM Antenna | G |
|
FM Antenna (supplied) | CONNECTIONS |
|
FM antenna connection
1.Connect the FM antenna supplied to the FM 75Ω COAXIAL terminal.
2.Slowly move the antenna wire around until you find a location where reception is good, then fasten it to a wall or other rigid surface.
Cooling Fan | The cooling fan supplies cool air to the unit to prevent overheating. |
Please observe the following cautions for your safety.
• Make sure the unit is
•Do not obstruct the cooling fan or ventilation holes. (If the cooling fan or ventilation holes are covered with a newspaper or cloth, heat may build up inside the unit and fire may result.)
17 | 18 |