Disc Playback
GB
Note |
•Depending on the content of the disc, the initial screen may appear different.
1 Press OPEN/CLOSE button to open the disc tray.
2 Load a disc.
•Place a disc gently into the tray with the disc’s label facing up.
3 Close the compartment by pressing the OPEN/CLOSE button again.
DVD VCD CD | OPERATION |
| |
• Playback starts automatically. |
|
To stop playback, press STOP during playback.
•If pressed once, “PRESS PLAY” is displayed and the stop position will be
stored in memory. If PLAY/PAUSE ( 
) button or ENTER button is pressed, playback resumes from the stop position. (This function works only with DVDs.)
• If pressed twice, “STOP” is displayed, and if PLAY/PAUSE ( 
) button is pressed, playback starts from the beginning.
To temporarily pause playback, press PLAY/PAUSE during playback.
• To resume playback, press PLAY/PAUSE ( 
) button again.
Selecting the Video Format
Press and hold NT/PAL button on the remote controller for over 5 seconds while the power is turned off.
• By default, the video format is set to "PAL".
• "NTSC" or "PAL" will appear in the display. At this time, press the NT/PAL button shortly to select between "NTSC" and "PAL".
• Each country has a different video format standard.
• For normal playback, the video format of the disc must be the same as the video | |
format of your TV. | 22 |
| |
