System setup

Setting up the Speaker Delay Time

When 5.1CH Surround Sound is played, you can enjoy the best sound if the distance between you and each speaker is the same.

Since the sounds arrive at the listening position at different times depending on the placement of speakers, you can adjust this difference by adding a delay effect to the sound of the Centre and Rear Speakers.

Setting Centre SPEAKER

If the distance of Dc is equal to or longer than the distance of Df in the figure, set the mode as 0ms. Otherwise, change the setting according to the table.

Distance

 

 

 

 

 

 

between

0.00 m

0.34 m

0.68 m

1.06 m

1.40 m

1.76 m

Df and Dc

 

 

 

 

 

 

 

 

 

 

 

 

 

Delay Time

0 ms

1 ms

2 ms

3 ms

4 ms

5 ms

 

 

 

 

 

 

 

Setting REAR SPEAKER

If the distance of Dc is equal to or longer than the distance of Dr in the figure, set the mode as 0ms.

Otherwise, change the setting according to the table.

Distance

 

 

 

 

 

 

between

0.00 m

1.06 m

2.11 m

3.16 m

3.62 m

5.29 m

Df and Dc

 

 

 

 

 

 

 

 

 

 

 

 

 

Delay Time

0 ms

3 ms

6 ms

9 ms

12 ms

15 ms

 

 

 

 

 

 

 

Ideal Centre SPEAKER

placement

Ideal

REAR SPEAKER placement

It is desirable to place all speakers within this circle.

Df: The distance from FRONT SPEAKER

Dc: The distance from Centre SPEAKER

Dr: The distance from REAR SPEAKER

MM `` With PL II (Dolby Pro Logic II), the delay time may be different for each mode. `` With AC-3 and DTS, the delay time can be set between 00 and 15mSEC. `` The Centre channel is only adjustable on 5.1 channel discs.

48