Setting the Test Tone

Use the Test Tone feature to check the speaker connections.

1.

In Stop mode, press the MENU button.

 

 

 

 

2.

Press the Cursor % button to move to Audio and then press the

 

 

 

 

 

ENTER button.

 

 

 

 

3.

Press the Cursor % button to move to TEST TONE and then press

 

 

 

 

 

the ENTER button.

 

 

 

 

 

• The test tone will be sent to L C R SR SL SW in

MOVE

ENTER

RETURN

EXIT

 

order.

 

 

 

 

 

If the ENTER button is pressed again at this time, the test tone

 

 

 

 

 

will stop.

 

 

 

 

d Press the RETURN button to return to the previous level.

 

 

 

 

d Press the EXIT button to exit the setup screen.

 

 

 

 

 

 

 

STOP

 

EXIT

Setting the Audio

 

 

 

 

You can adjust the balance and level for each speaker.

 

 

 

 

1.

In Stop mode, press the MENU button.

 

 

 

 

 

 

 

 

2.

Press the Cursor % button to move to Audio and then press the

 

 

 

 

 

ENTER button.

 

 

 

 

3.

Press the Cursor % button to move to SOUND EDIT and then press

 

 

 

 

 

the ENTER button.

 

 

 

 

4.

Press the Cursor ,button to select and adjust the desired item.

MOVE

ENTER

RETURN

EXIT

 

Press the Cursor ,button to adjust the settings.

 

 

 

 

 

 

 

 

 

d Press the RETURN button to return to the previous level.

dPress the EXIT button to exit the setup screen.

MOVE CHANGE RETURN EXIT

EnG

system● setup

49