Samsung HT-TX45 Speaker Installation, How to Install the Speaker on the Stand, HT-X30/X40

Speaker Installation

You have the option of installing the speakers on Stands, or directly to the Stand Base.

Speaker Components (HT-TX35 only)

SPEAKER STAND STAND BASE Screw (A) Screw (B)

How to Install the Speaker on the Stand

Connecting the Optional Wireless Receiving Amplifier ENG

To connect the rear speakers wirelessly, you have to purchase the wireless receiving module and

TX card from your Samsung retailer.

When you have Purchased the Wireless Receiving Module (SWA-3000)

HT-X30/X40
Front Speaker (R)	Center Speaker
	Front Speaker (L)

12

34

1 Turn the STAND upside-down and connect it to the STAND BASE.

2 Insert two screws (A) into the two holes marked with arrows using a screwdriver as shown in the illustration.

3 Insert a screw (B), into the hole on the rear of the Speaker

STAND.

	CONNECTIONS
	Subwoofer
Rear Speaker (L)	Rear Speaker (R)

	4	Connect the assembled stand to the SPEAKER.
	5	Insert another screw (B) into the hole on the rear of the
		speaker using a screwdriver as shown in the illustration.
5	6	This is the SPEAKER successfully assembled with
	6	the Stand.

• Make sure that the speaker is installed on a flat and stable area. Otherwise it may be easily knocked over.

How to Install the Speaker on the Stand Base

1	2	1	Connect the SPEAKER with the STAND BASE.
		2	Insert the screw (B) into the hole on the rear of the speaker
			using a screwdriver as shown in the illustration.
		3	This is the SPEAKER successfully assembled with
			the Stand Base.
3

WIRELESS RECEIVER MODULE

HT-TX35/TX45
	Front Speaker (R)	Front Speaker (L)
		Center Speaker
		Subwoofer
Rear Speaker (L)	Rear Speaker (R)
WIRELESS RECEIVER MODULE

14 15