Connecting Audio from External Components (Con’t)
OPTICAL : Rear Panel |
Optical Cable |
(not supplied) |
OPTICAL : Connecting an External Digital Component
Digital signal components such as a
1 Connect the Digital Input (OPTICAL) on the Home Theater to the Digital Output of the external digital component.
2 Press the AUX button on the remote control to select <DIGITAL IN>.
■You can also use the FUNCTION button on the main unit.
The mode switches as follows : DVD/CD ➝ DIGITAL IN ➝ AUX 1 ➝ AUX 2 ➝ HDMI IN ➝ USB ➝ FM ➝ XM.
Connecting the FM Antenna | ENG |
| FM Antenna (supplied) |
SPEAKERS OUT | CONNECTIONS |
(IMPEDANCE 3§ ) | |
|
1 Connect the FM antenna supplied to the FM 75Ω COAXIAL Jack.
2 Slowly move the antenna wire around until you find a location where reception is good, then fasten it to a wall or other rigid surface.
• This unit does not receive AM broadcasts.
Cooling Fan
The cooling fan supplies cool air to the unit to prevent overheating.
Please observe the following cautions for your safety.
SPEAKERS■ Make sure the unit is
(IMPEDANCE
unit may rise and may damage it.
■ Do not obstruct the cooling fan or ventilation holes. If the cooling fan or ventilation holes are covered with a newspaper or cloth, heat may build up inside the unit and fire may result.
24 | 25 |