SYMPTOM

Check/Remedy

The main unit is not working. • Turn off the power and hold the STOP (@) button on the

(Example: The power goes out remote control for longer than 5 seconds. STAND BY RED

or strange noise is heard.)

LED blinks on the display and all settings will return to the

• The DVD player is not working

default values.

normally.

 

 

Using the RESET function will erase all stored settings.

 

Do not use this unless it is necessary.

 

 

The password for rating level has

• While “NO DISC” message appears on the display of main

been forgotten.

unit, hold the main unit's STOP (@) button for longer than 5

 

seconds. “INITIAL” appears on the display and all settings will

 

return to the default values.

 

• Press the POWER button.

 

Using the RESET function will erase all stored settings.

 

Do not use this unless it is necessary.

 

 

Can't receive radio broadcast.

• Is the antenna connected properly?

 

• If the antenna's input signal is weak, install an external FM

 

antenna in an area with good reception.

EnG

troubleshooting ●

53